BSG MGC Public Release Channel

BSG public version changelog (9.6.080 from 2026/08/29): - a real-time "motion detector" algorithm has been added to the modification for automatic cancellation of "bento" application. - for the "motion detector", the following items have been added to Developer Settings: "camera.bento_cancel_threshold_size", "camera.bento_cancel_threshold_strength" and "camera.bento_cancel_threshold_movement" (cancellation thresholds; if at least one threshold is exceeded, "bento" is automatically disabled). when a "cancellation threshold" value is set below 0, this "cancellation threshold" is disabled and does not affect "bento". when the Developer Settings option "camera.bento_enabled" is enabled and at least one "cancellation threshold" is active, a line appears at the top of the camera preview showing "Bento: ON" (or "Bento: OFF") to indicate the current bento state. when the Developer Settings options "camera.bento_enabled" and "camera.bento_annotate_final_image" are enabled, four lines appear at the top of the camera preview: "MotionStrength:", "MotionSize:", "MotionStrength:" and "Bento:" which display the current "cancellation threshold" values and the "bento" state (these items are shown for convenient tuning of bento cancellation thresholds). - "nonzsl_motion_min_signal" and "nonzsl_motion_min_speed" options have been added to the developer settings; these define the minimum motion thresholds in the frame—if exceeded while in Enhanced HDR+ mode, the exposure time will be reduced to prevent image blur. - fixed errors found in the modification's operation. - fixed operation on some devices. Support the Project (watch an ads) Modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.7.047 from 2026/08/26): - a real-time "motion detector" algorithm has been added to the modification for automatic cancellation of "bento" application. - for the "motion detector", the following items have been added to Developer Settings: "camera.bento_cancel_threshold_size", "camera.bento_cancel_threshold_strength" and "camera.bento_cancel_threshold_movement" (cancellation thresholds; if at least one threshold is exceeded, "bento" is automatically disabled). when a "cancellation threshold" value is set below 0, this "cancellation threshold" is disabled and does not affect "bento". when the Developer Settings option "camera.bento_enabled" is enabled and at least one "cancellation threshold" is active, a line appears at the top of the camera preview showing "Bento: ON" (or "Bento: OFF") to indicate the current bento state. when the Developer Settings options "camera.bento_enabled" and "camera.bento_annotate_final_image" are enabled, four lines appear at the top of the camera preview: "MotionStrength:", "MotionSize:", "MotionStrength:" and "Bento:" which display the current "cancellation threshold" values and the "bento" state (these items are shown for convenient tuning of bento cancellation thresholds). - "nonzsl_motion_min_signal" and "nonzsl_motion_min_speed" options have been added to the developer settings; these define the minimum motion thresholds in the frame—if exceeded while in Enhanced HDR+ mode, the exposure time will be reduced to prevent image blur. - fixed errors found in the modification's operation. - fixed operation on some devices. Support the Project (watch an ads) Modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.6.080 from 2026/08/22): - the options "Juiciness color", "Zipper 2", and "Zipper 3" have been added to the "All modes" section under the module's "Additional settings". - "Black Point" (min/max) (recommended range: -0.5 to 0.75) and "White Point" (min/max) (recommended range: -1 to 1.5) settings have been added to the "All modes" section under the module's "Additional settings" (these ranges allow values ​​to be applied based on ISO). - in the module's "Additional settings" (for all modes), the "Brightness" (min/max) and "Better Color" (min/max) options have been added to the "Sabre Param" section (the min/max range allows the value to be applied based on ISO). - fixed errors found in the modification's operation. - fixed operation on some devices. Support the Project (watch an ads) Modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.7.047 from 2026/08/19): - added the ability to enter the menu from the "shortcut" ("Open settings" in the menu by holding on the modification icon). - added section "Noise Model Correction" settings to the module with the ability to load from a file (the file must be in *.с format). To apply the "user noise model", all 16 fields (A, B, C, D) must be filled. Use "RESET ALL USER VALUE" to clear the USER VALUE fields. (There are 3 options for the algorithm: 1. "Activate user noise model" = OFF -> values ​​from the Google camera library are used, 2. "Activate user noise model" = ON, fields (A, B, C, D) = NULL (or not all 16 fields are filled in) -> are used values ​​from Android libraries, 3. "Activate user noise model" = ON, fields (A, B, C ,D) are filled -> values ​​from (A, B, C ,D) are used.) - fixed errors found in the modification's operation. - fixed operation on some devices. Support the Project (watch an ads) Modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.4.103 from 2026/09/16): - for convenience and to check the correctness of the HEX string input in the "Value (8 charaster)" item in the "Data for editor" section of the HEX editor, the data in the description of this menu item is displayed as an assembly string. - to speed up the application, certain algorithms running in a continuous loop and involved in capturing and saving photos have been optimized. - fixed errors found in the modification's operation. - fixed operation on some devices. Support the Project (watch an ads) Modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.6.080 from 2026/08/08): - a "Processing conveyor" menu item has been added to the module settings ("Off", "Unsigned 16-bit", "Float 16", "Float 32-bit"); this setting affects the speed of image processing and saving, and also indirectly influences the image quality itself. - a "Sabre Param" section has been added to the module's "Additional Settings" (for all modes). - a "Luma Denoise" section has been added to the "Sabre Param" area within the module's "Additional settings" (for all modes), containing the following options: "Low" (L1, L1A, L1B, L2, L2A, L2B, L3, L3A, L3B, L4, L4A, L4B, L5, L5A), "Medium" (L1, L1A, L1B, L2, L2A, L2B, L3, L3A, L3B, L4, L4A, L4B, L5, L5A), and "High" (L1, L1A, L1B, L2, L2A, L2B, L3, L3A, L3B, L4, L4A, L4B, L5, L5A). - fixed errors found in the modification's operation. - fixed operation on some devices. Support the Project (watch an ads) Modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.7.047 from 2026/08/05): - a "Processing conveyor" menu item has been added to the module settings ("Auto", "Unsigned 16-bit", "Float 16", "Float 32-bit"); this setting affects the speed of image processing and saving, and also indirectly influences the image quality itself. - a section "Exposure correction" has been added to the module settings (divided into Auto HDR+ and Advanced HDR+: "Shutter speed correction \ ISO" ("Max. shutter speed", "x8 shutter speed", "x6 shutter speed", "x4 shutter speed", "x2 shutter speed" ", "Off", "x2 ISO", "x4 ISO", "x6 ISO", "x8 ISO", "Max ISO")) when the "Max. Shutter" items are activated, an additional item "Maximum shutter speed threshold (ms) appears )", when activating the "Max. ISO" items, an additional item "Minimum ISO threshold" appears. - fixed errors found in the modification's operation. - fixed operation on some devices. Support the Project (watch an ads) Modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.6.080 from 2026/08/08): - a "Sharp" section has been added to the "Additional settings" of the "All modes" module. - in the module's "Advanced Settings" section (for all modes), within the "Sharp" subsection, the following options have been added: "RAW Sharpen" (this menu item combines the "RAW Sharpen A" and "RAW Sharpen B" functions), "Sharp Depth 1", "Sharp Depth 2", and "Sharp legibility". - in the module's "Additional settings" (for all modes), the items "", "Contrast 1", "Contrast 2" (min/max), "Contrast Black", and "Lighting" have been added to the "Processing Param" -> "Lighting processing" section. - fixed errors found in the modification's operation. - fixed operation on some devices. Support the Project (watch an ads) Modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.7.047 from 2026/08/05): - in the main modification settings, in the "Video" category, the "Optical video stabilization" and "Use custom profiles" items have been added, the "Video stabilization" item has been renamed to "Electronic video stabilization". - when activating the "Use custom profiles" item in the module settings, the "Custom video profile" ("Audio Bit Rate", "Audio Channels", "Audio Codec", "Audio Sample Rate", "File Format", "Video Bit Rate", "Video Codec", "Video Codec Profile", "Video Codec Level", "Video Frame Rate") section is added to the "Video" category. - fixed errors found in the modification's operation. - fixed operation on some devices. Support the Project (watch an ads) Modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.4.103 from 2026/09/03): - the "RAW Converter and YUV HDR+" section has been added to the module settings (the developer settings items: "raw16_to_raw10_converter_enable", "raw16_to_raw10_converter_faster", "yuv_hdrplus_scale_shift" and "yuv_hdrplus_faster"). - in the module settings, in the "RAW Converter and YUV HDR+" section, the "RAW16(14)(12) Conversion" category has been added, and in it the following items: "Enable Convert", "White Level for convert", "Black Level for convert" and "Convert faster". - in the module settings, in the "RAW Converter and YUV HDR+" section, a "YUV HDRPlus" category has been added, along with the following items: "Scale Shift" and "YUV HDR+ faster"(the ability to create HDR Plus from YUV format for devices with LIMITED HARD LEVEL modules. (This mode is enabled automatically if the module does not support RAW format)). - added "camera.force_gyro_sample" to the developer settings (additional "software stabilization"(taking gyroscope data into account when stitching frames together to create a photo) for micro-video and photos; a high-quality gyro sensor on the device is essential for this to work; a poorly performing gyro sensor can degrade photo quality), also enables the correct operation (activation) of "Astro" in "auto" mode. - fixed errors found in the modification's operation. - fixed operation on some devices. Support the Project (watch an ads) Modification discussion group: PublicGroup_MGC_BSG